Emission and Imission

Emission and Imission

  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions – Manual determination of mass concentration of particulate matter (20 to 1000 mg / m3) – TS ISO 9096
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions Determination of low range mass concentration of dust (5-50 mg / m³) -TS EN 13284 – 1
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions – Determination of Gas Flow Rate and Flow Rate in Duct with L and S Type Pitot Tubes – TS ISO 10780*
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions – Determination of Smoke Density (Smut) The Bacharach Method – TS 9503*
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions – Determination of Nitrogen Monoxide (NO), Nitrogen Dioxide (NO&#₈₃₂₂;) and Nitrogen Oxide (NOx) Emissions Electrochemical Cell Method – EPA CTM 022*
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions – Determination of Oxygen (O₂) and Carbon Monoxide (CO) Electrochemical Cell Method – TS ISO 12039*
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions – Determination of Mass Concentration of Sulfur Dioxide (SO&#₈₃₂₂;) – TS ISO 7935*
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions – Determination of Moisture Content – EPA Method 4
  • Stack Gas  (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions -Determination of Moisture by Humudity Probe (≤ 180 °C for the stack temperature) – Inhouse Method ( DT – B05 Rev.01 )*
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions – Determination of the mass concentration of individual gaseous organic compounds – Activated carbon and solvent desorption method Benzene, Bromobenzene, n-Butyl Benzene, Ethylbenzene, 4-Isopropyl Toluene, Styrene, Toluene, 1,2,3-Trichlorobenzene, 1,2,4-Trichlorobenzene, 1,2,4-Trimethylbenzene , 1,3,5 Trimethylbenzene , m-Xylene , Naphthalene, trans-1,2-Dichloroethene 1,1-Dichloroethane cis-1,2-Dichloroethene Bromochloromethane Chloroform 2,2-Dichloropropane 1,2-Dichloroethane 1,1,1-Trichloroethane 1,1-Dichloropropene Dibromomethane 1,2-Dichloropropane Trichloroethene Bromodichloromethane cis-1,3-Dichloropropene trans-1,3 Dichloropropene 1,1,2-Trichloroethane 1,3-Dichloropropane Dibromochloromethane 1,2-Dibromoethane Tetrachloroethene 1,1,1,2-Tetrachloroethane Chlorobenzene Bromoform o-Xylene 1,2,3-Trichloropropane Isopropylbenzene (Cumene) n-Propylbenzene 2-Chlorotoluene 4-Chlorotoluene tert-Butylbenzene sec-Butylbenzene 1,3-Dichlorobenzene 1,4-Dichlorobenzene 1,2 Dichlorobenzene 1,2-Dibromo-3-chloropropane Hexachlorobutadiene 1,1,2,2-Tetrachloroethane p-Xylene (GC – FID)
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions- Determination of Dust Emission Amount with Stack Outside Sampling, Pretreatment: Gravimetric Method – EPA Method 5
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) –  Stationary Source Emissions Determination of Dust Emission Amount with Stack Inside Sampling – EPA Method 17
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions – Sampling of Gaseous Chlorides Defined as HCl and Sampling of Mass Concentration and determination Spectrophotometer – TS EN 1911
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions – Hydrogen Cyanide (HCN) Sampling and Determination Spectrophotometer – CARB 426
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions -Six-Value Chromium (Cr + 6) Sampling and Determination Spectrophotometer – CARB 425
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions – Determination of Mass Concentration of Total Organic Carbon in Gas State at Low Concentrations in Flue Gases FID Analyzer – TS EN 12619*
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions – Formaldehyde Sampling and Determination From Stationary Sources Using Natural Gas Spectrophotometer – EPA Method 323
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Sampling and Determination of Heavy Metals from Stationary Source Emissions Antimony (Sb), Arsenic (As), Barium (Ba), Beryllium (Be), Cadmium (Cd), Chrome (Cr), Cobalt (Co), Copper (Cu), Lead (Pb), Manganese (Mn), Mercury (Hg), Nickel (Ni), Phosphorus (P), Selenium (Se), Silver (Ag), Thallium (Tl), Zinc (Zn) ICP-OES – EPA Method 29
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Sampling and Determination of Heavy Metals from Stationary Source Emissions Arsenic (As), Cadmium (Cd), Chrome (Cr), Cobalt (Co), Copper (Cu), Manganese (Mn), Nickel (Ni), Lead (Pb), Antimony (Sb), Talyum (Tl) and Vanadium (V) ICP – OES – TS EN 14385
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions – Nitrogen Monoxide (NO), Nitrogen Dioxide (NO₂) and Nitrogen Oxide (NOx) Sampling and Determination Alkaline Permanganate (Ion Chromatography) – EPA Method 7D
  • Stack Gas
    (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions -Temperature Determination – In-house method (DT-B037 Rev.00)*
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions -Determination of Total Fluorine (F) SPANDS Method – EPA Method 13 A
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions – Sulfuric Acid (H₂SO₄) Vapor, Sulfur Trioxide (SO₃), Sulfur Dioxide (SO₂) Amount Sampling and Determination Titrimetric Method (BariumThorin) – EPA Metot 8
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions -Determination of Hydrogensulfide (H₂S) Ratio in Gasoline Steam in Petroleum Refineries Pretreatment: Solution Absorption Analysis: Titrimetric Method – EPA Metot 11
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions – Ammonia Sampling and Determination Ion Selective Electrode – SCAQMD Metot 207.1
  • Stack Gas (TSE CEN / TS 15675 and TS EN 15259 Complies with the requirements) – Stationary Source Emissions -Phosphoric Acid Sampling and Determination Pretreatment: Solution Absorption Measurement: Spectrophotometric Method – In-house Method DT -B044 / Rev 01 (NMX-A-90)
  • Immission (Ambient Air) – Suspended Solids in the determination of the fraction PM 10 Gravimetric Method – EPA 40 CFR 50 App J M
  • Immission(Ambient Air) –  Determination of Precipitated Dust Gravimetric Method – TS 2342
  • Immission(Ambient Air) –  Determination of Heavy Metals in Precipitated Dust Thallium (Tl), Lead (Pb), Cadmium (Cd) ICP-MS – VDI 2267 Part 2
  • Immission (Ambient Air) – Determination of Collapsed Powder Heavy Metals Thallium (Tl), Lead (Pb), Cadmium (Cd) Analysis Method: ICP-MS Method – VDI 2267 Part1

CERTIFICATES

MEMBERSHIPS

How can we help you?

You can fill the forms on our website for your analysis requests or you can contact us through our contact information.